Description: Product DescriptionPackage include1 set of GRBL offline controller1 set of cable1 set of SD cardSpecificationsConnection: USB (USB-CH340)Software: GRBL controller, Universal Gcode SenderMaster chip: atmel 328P (arduino nano)Stepper motor driver: A4988Spindle drive chip: MOSFET, the highest 60V (recommendation within 48V, current :within 10A )Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57)Laser engraving: SupportFunctionsControl X, Y, Z-axis movingControl spindle on/offAdjust spindle speed, stepPlease NoteRouter cannot be connected to the Offline Controller and by a USB cable at the same time:1.Before connecting the Offline Controller disconnect the USB cable from the routerOR2.Before connecting the USB cable disconnect the Offline Controller from the routerEasy to connectConnect the offline module to the GRBL controller board, then use it to control the CNC rounterSupport SD and TF cardSupport SD card and TF card at the same time, standard capacity 1G.No need to connect a computer, this can download the required engraving files to the offline controller (available USB or TF card reader).1.Main PageCtrl: Machine Control;File: Use the Gcode file;Press [Y+] [Y-] to select; Press[Ok] to Enter2.Control PageX± Y± Z±: Moving AxisOK/Spindle: Spindle ON/OFFExit/Step: Change Step/Exit (long press)How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.3.File PageCommon supported formats include nc. tex. tap.Press [Y+] [Y-] to select filePress [Ok] to EnterPress [Ok] to begin if you are readyNote:Long press [Exit] to stop machiningPress Z+ and Z- , the Z axis will move up and down.Press X+ and X- , the X axis will move left and right.Press Y+ and Y- , the Y axis will move Front and Back.Press SPIN : Spindle on (Laser on ), Spindle off (laser off)Press SMOD: returnPress Z+ for 5 seconds , change the Language to English.Press X- or X+ button to switchControl：Press confirmation button to access manually controlling pageFile：Press confirmation button to access file pageSet：Press confirmation button to access setting pageOn the off-line controller, buttons control corresponding actions.SPN is spindle controlling,should press SPIN.Fan is fan controlling, should press SMOD.Common supported formats include nc. tex. tap.Press [Y+] [Y-] to select filePress [Ok] to EnterPress [Ok] to begin if you are readyNote:Long press [Exit] to stop machiningX± Y± Z±: Moving AxisOK/Spindle: Spindle ON/OFFExit/Step: Change Step/Exit (long press)How to increase the spindle power: After pressing the spindle button, press and hold the OK button and the Z+ button simultaneously to increase the speed.How to decrease the spindle: After pressing the spindle button, press and hold the OK button and the Z- button simultaneously to decrease the speed.Wide applicationSupports 1310, 1610, 3018, 3018-pro ,upgraded 3018-pro etc grbl control cnc machine.Shipping Please open the package and check if there are some damages before sign, if there are some damages , please do not sign and contact us immediately Items will be shipped within 1-2 days upon the receipt of payment.Problem&Feedback Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. We are a new member in ebay now, and need understand both of sides Pls email us before you want to leave any negative feedbackRefund When you have the parcel, and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos Any reason required for all refund. Item must be in it's original condition and no physical damage. Buyer responsible for all shipping costContact us Welcome worldwide customer inquire and questions, we will try to do our best to feedback customer’s email within 1-2 business days,if not pls check the mail box again Customer’s satisfaction is very important to us.
Price: 19.99 USD
Location: shang hai
End Time: 2025-01-11T09:38:41.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: RATTMMOTOR
Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A
Support: Support SD card and TF card at the same time
Connection: USB (USB-CH340)
Master chip: atmel 328P (arduino nano)
Spindle drive chip: MOSFET, the highest 60V(recommendation within 48V, current :withi
MPN: Does Not Apply
Software: GRBL controller, Universal Gcode Sender
Laser engraving: Support
Stepper motor driver: A4988
