3M Lapping Film Assortment POLISHING 30,12,9,3,1, & 0.3 micron 8.5 x 11 USA 3M

Description: USA Born and raised I ship FAST! Buy From ME3M films 3M Lapping Film, sanding film for fine finishing on plastic, metal, non-ferrous metal, rubber etc. The polyester film combined with uniform abrasive grit provides best finishes. YOU ARE BUYING 1 SET of Six SHEETS 3M LAPPING FILM SHEETS Assortment of 3M lapping film6 SHEETS 1 each of 30,12,9,3,1, and 0.3 micron 8 1/2" x 11" sheets NOTE: Buy as many assortments as you like and I will still ship for free! :)This is an assorted set of 3M lapping film consisting of 1 EACH of .3,1, 3, 9, and 12, and 30 micron sheets, These are the 8.5 x 11 inch sheets. Easy to cut to any size you like. This is the real US Made 3M product not the cheap imported stuff that wears out in half the time. This set can be used as a super sharp knife sharpening system. Most of you already know how to apply and use these sheets; if not, there are many video guides on YouTube. These sheets have plenty of other hobby uses as well.IVORY = .3 micron = ~60,000 gritGreen = 1 micron = - 14000PINK = 3 micron = ~7000 gritBLUE = 9 micron = ~1800 gritYellow = 12 micron = ~1200 gritDark Green = 30 Micron 600 grit The .3 micron is so fine it is hard to tell which side of the sheet it is on. A little secret for using the .3 micron; This sheet is awesome for stropping the final edge or touching up a razor edge. The sheet needs a little bit of a cushion to get that perfect edge. Place a wet piece of paper or wet paper towel on your sharpening surface and then place your .3um sheet on top of that. Moisten the top of the sheet and draw your blade lightly across evenly stroked on both sides. Perfection.These are the plain non PVA backed sheets.Remove and re-apply these sheets on my sharpening surface as needed. There cannot be a bubble, hair, piece of lint or any debris under your film or it will tear during use. The PVA sheets have an adhesive on the back that is a dust and debris collector and difficult if not impossible to clean once removed. The non-pva sheets are very easy to keep clean and re-apply time after time with just a little water. All films should be used for wet sanding only. If you have no idea how to use it, please go to Youtube, search " Lapping Film " NOTE: Many times your films are delivered inside of a magazine for protection. Simply open the magazine and find your films. Thanks

Price: 26.33 USD

Location: Arroyo Grande, California

End Time: 2025-01-29T02:43:40.000Z

Shipping Cost: 0 USD