Description: General Motors 1964 - 1967 A Body New Flanged Housing 60.5" Stock pinion Location with Big Ford Housing Ends Wheel mounting flange to wheel mounting flange will be 60.5" with axles installed 1964-1967 Chevelle, Cutlass, Regal, Lemans, GTO, ect. 60.5" track width with brakes installed. CHOOSE: GEAR RATIO REAR END YOKE SIZE AND BOLT PATTERN FILL AND DRAIN PLUGS (NONE OR 3/4 NPT IF REQUESTED WHEN YOU ORDER) **********( WE CAN NOT BUILD UNTIL THE ABOVE OPTIONS ARE CHOSEN!!!)************ Ford 9 Inch for A Body New Flanged Housing 60.5" Stock pinion Location with Big Ford New Style Housing Ends. 64-67 GM Midsize Cars. Wheel mounting flange to wheel mounting flange will be 60.5" with axles installed (2 1/2" offset axles) Stock rear end pinion yoke location between wheel flanges when center section is installed. Standard driveshaft location to the right exactly like a General Motors rear. New Stamped Housing with new 3" x .188" wall DOM tubing.Big Ford New Style (torino) housing ends with .375" (3/8") bolt holesnew studs installed in housing Nodular Iron Trac Loc Center Section 9" Ford with 31 spline US Gear ring & pinion, Assembled.FREE Shipping! The Center Section will be Assembled and set up for Street by Professionals.ALL NEW UNIT! Nodular Iron Gear case and Nodular iron Stock size Pinion Support.9 inch Ford US GEAR 8620 Street Series Ring & Pinion (ratios 325, 350, 370, 389, 4.11 or 4.30) .2.89" OD Bearing size x 1.78" ID bearing surface. nodular iron 5 bolt pinion support. CHOOSE Rear End Yoke: choose 1310 series (3 7/32" wide with 1 1/16" cap OD) or 1330 series 3 5/8" wide with 1 1/8" cap OD) rear end yoke.9 inch Ford PEM 31 spline Trac Loc Carrier (posi clutch style unit) must use bottle of friction modifier in your lube Package includes: PEM nodular iron case, iron pinion support, pinion bearings & races, pinion bolts, pinion depth shims, pinion seal, pinion nut, side bearings & races, premium ring gear bolts, tail bearing and tail bearing retainer plate.All bearings and seals are Premium Brands ( either Timken or Koyo).Also comes with big housing gasket, u-bolts for yoke and 4 ounce bottle of friction modifier. We will build this center section after you verify the ratio of ring & pinion and the yoke series you want. PEM Econo Rear Disc Brake Kit with Emergency Brake Calipers for 9" Ford This 9 inc Ford Disc Brake Kit kit includes bolt-on caliper brackets11-1/4" vented rotors with 5 on 4-1/2" and 5 on 4-3/4" bolt circlesRotor is 11.25" OD x .960" wideRotor had hub register of 2.78" ODRotor has 6.25" Inside DiameterRotor offset of 2.25"Bolt patterns have 1/2" stud holes to accommodate 1/2" studsThe brackets fit the Large Old Style Ford and the New Style Large Torino Housing Ends shown in picture # 11 above. '78-'88 GM emergency brake calipers, brake pads and hardware.Minimum 15" diameter wheels. Caliper piston size is 2.375" OD. WARNING: Cancer And Reproductive Harm- www.P65Warnings.ca.govTHIS WILL BE SHIPPED BY TRUCK FREIGHT TO A COMMERCIAL ADDRESS. MUST HAVE A LOADING DOCK OR A FORK LIFT.
Price: 3309.69 USD
Location: Saint Clair, Missouri
End Time: 2024-03-08T01:06:51.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Modified Item: No
Custom Bundle: No
Manufacturer Part Number: FHNAB302302SL-TL-Disc
Brand: PEM
Non-Domestic Product: No
