700C Bike Tubes, 2Pcs 700x35/43c Road 700x35/37/38/40/42/43c, Black

Description: 【Size】 Our 700c(28") bike tubes are suitable for bikes with wheel sizes: 700c x 35c - 43c. Fit all the following sizes: 28 x 1.35, 28 x 1.40, 28 x 1-5/8 x 1-3/8, 28 x 1.50, 28 x 1-5/8 x 1 1/2, 28 x 1-5/8 x 1-3/4, 28 x 1.60, 28 x 1.625; (French size: 700x35C 700x38C 700x40C 700x42C 700x43C); ( ETRTO : 35-622 / 37-622 / 40-622 / 42-622 / 44-622 )32mm Schrader (Regular) Valve【High Quality】Our bike inner tubes are made of high-quality butyl rubber material. With good resistance to heat and harsh weather. It has better air tightness and durability, which extends tire life due to restricted air loss【Pick the Right Tube Size】Check the sidewall markings on your tire. Select the tube that has the same diameter as your tire. Tire width should fall into the range of tube width【Installation Tips】Inflate a little air before installment, to avoid crack or damage during installment; Install the valve correctly, which must be 90° with steel, and the nut must be well locked; After installment, please check the tube is in the right position between steel and tire, make sure the tubes are not clamped by them. Inflate the air according to the pressure standard of the tire Product Description Size: 700x35c/43cValve Type: Schrader ValveValve Length: 32mm (standard bicycle tire Schrader valve length)Tube Material: Butyl 1 Pick the Right Tube Size 2 Pick the Right Valve Stem 3 Pick the Valve Length Warm Tips: Please kindly confirm the size of your bike tire before you buy, width between 35mm-43mm tires.Before inserting the new tube, make sure to check for sharp/pointed objects inside or embedded in the tire, that could puncture the tube.Remember to always add 20%-30% air (to give the tube form) to the new inner tube before installing it. This will prevent it from bunching up and/or causing a pinch flat or possibly blowing the tire off the rim (when you immediately and fully inflate) which ultimately will pop the tube.Check tire air pressure regularly; Try to keep your tire properly inflated as much as possible. Never overinflate and of course, don’t underinflate.Place the valve through the hole in the rim. The valve should stick out at a 90-degree angle. Screw the valve cap on tightly and securely.After installation, make sure the tube is fully inside the tire and not pinched between the tire and the metal frame. Now you can inflate the tire to recommended pressure levels.

Price: 19.68 USD

Location: Denver, Colorado

End Time: 2024-11-07T15:56:00.000Z

Shipping Cost: 0 USD