AR-(2 Pack) 4.10/3.50-4 Tire and Wheel, 10-Inch Pneumatic Tire with 5/8" Bear...

Description: This tire and wheel set comes aired and ready to install. With a size of 4.10/3.50-4 inches, a tire diameter of 10.3 inches, a tire width of 3.3 inches,2.2 inches offset hub, and 5/8 inches axle bore hole, these tires are of the most common size and type of tires used on hand trucks, lawn mowers, and other wheeled equipment. Used for both home and commercial purposes, these wheels have a maximum load capacity of 300 pounds and a PSI of 30. And although these wheels are heavy-duty, they aren't designed for use as driving wheels. Instead, they are suitable for free- rolling applications including rear (idle) wheels for lawn mowers, hand truck wheels, and trail-behind attachments. The treads are perfect for outdoor use. Sawtooth treads provide maximum traction without harming grass. It also lasts longer and with its jagged tracks, it provides a solid grip on different terrains including turf, paved paths, dirt, and sand. Worried about punctures? The AR-10" heavy-duty tire and wheel set has explosion-proof inner tubes. Use these wheels in any terrain without worries. Accidentally over inflated the tires or the summer heat increasing your tires' pressure? No worries. The inner tube's self-sealing capabilities work almost instantaneously, preventing injuries and damage to property. Not sure if these wheels will fit your equipment? Check the sidewall of your equipment's old or existing tires. The size, max load capacity, and tire pressure are all stamped on the side wall. To confirm the size, all you need to do is to measure the outside tire diameter. For the hub length and bearing size, you'll need to make manual measurements. Measure the hub bearing-to-bearing but for offset hubs like these 2-pack AR-heavy-duty tires and wheels, you can measure only the offset since its measurement (2.2 inches) is the available for comparison. UNIVERSAL TIRE AND WHEEL - These 10-inch rubber tires are perfect for a wide variety of applications. It has 5/8-inch axle bore hole that fits numerous dollies, walk-behind lawn mowers, hand trucks, wheelbarrows, yard trailers, dollies, trolleys, wagons, snow blowers, pressure washers, air compressors, generators, go-karts, wood chippers and more! HEAVY-DUTY TIRE AND WHEEL MADE FROM PREMIUM QUALITY MATERIALS - The tire and inner tube are both made from 100% natural rubbers while the rim is made from premium-quality steel. With rubber that is 4X times thicker than other brands, these wheels provide maximum shock absorption for a smooth and comfortable ride. HEAVY DUTY INNER TUBES - Safety first is our motto. We ensure that all our products pass safety standards. These tires' inner tubes have an HEAVY DUTY design that creates an airtight seal in the event of a tire puncture. The seal prevents further damage to the tires and ensures that the rider/equipment operator doesn't incur any injuries. SAWTOOTH TREAD AND DOUBLE-SEALED BALL BEARINGS- For heavy-duty applications, it's important for wheels to have the balance between traction and maneuverability. The sawtooth tire treads and the ball bearings ensure that the tires will have good traction even on the most challenging terrains while the ball bearings provide flexible rotations and load balancing, enabling you to push less and push easier. US-BASED - Got any questions regarding your purchase or our products, in general? Don't hesitate to our US-based team. We will respond to your questions within 5 hours.

Price: 36.22 USD

Location: Dover, Delaware

End Time: 2024-09-28T19:12:24.000Z

Shipping Cost: 0 USD