Fits RamStreet Stock Hydraulic Throwout Bearing

Description: Designed to work with 10-1/2" street stock type clutches, Comes with a new special machined front bearing retainer for the release bearing to ride on, Overall length is 4.875" and the shaft measures 3-5/8", Features a steel construction with a natural finish, Kits contain the bearing, bleeder hose assembly, shims and mounting hardware Ram Street Stock Hydraulic Throwout Bearing - Ford T-5 Sku # 60578130 Mfr. Part # 78130 Condition New Brand Ram Clutches Sold Each Details Info Ram hydraulic bearings ease installations in vehicles with chassis constraints, and offer a smooth, lighter pedal effort. Kits contain the bearing, bleeder hose assembly, shims and mounting hardware. A 3/4 inch bore master cylinder and AN 3 feed line are required for this installation. For 10-1/2" street stock type clutches. This bearing comes with a new special machined front bearing retainer for the release bearing to ride on. NOTE: When using with world class T-5 case, a front bearing retainer sleeve # 908 will be required. All other world class T-5 retainers/sleeves of a different number will require the use of Ram Clutch kit part # 78136. Learn more about hydraulic release bearings and how to properly install them by reading our tech article. Clutches, Flywheels and release bearings are STRICTLY FACTORY WARRANTY ONLY. Customer must return the unit to RAM for evaluation and inspection. For a full list of warranty information please see our warranty information Specs Overall length 3.045 Bearing O.D. 2.87 Sleeve I.D. 1.15 Sleeve O.D. 1.37 1 ¾ compressed length with .700 travel Charts (PDF) Installation Tips This kit includes a replacement front bearing support for the T-5 transmission. The support has a machined "recess" or "register" that the race for this transmissions' tapered front bearing must be installed into. The bearing race is about 2.5" OD and about 5/8" deep. This support also has the necessary "smooth" area for the t/o bearing to slide back-and-forth on. The front bearing support is in addition to the hydraulic throwout bearing, bleeder hose, and other components within each kit. CAUTION: Please follow all installation instructions regarding installation and setup. Incorrect setup height will cause undue stress on the o-rings from being over travelled and may lead to a leak in the system. ONLY use Teflon tape to install the fittings or fluid leakage will occur. Please see videos for complete setup information. Specs Material Type Steel Sold in Quantity Each Finish Natural Notes Shaft measures 3-5/8" Hardware Included No GTIN Code 809009356701 Overall Length 4.875 Reviews Working as intended Rated by Jake on December 22, 2021 Summary: Custom application. Ford WC t5 behind a Mercruiser 3.7L. Ended up having to turn the OD of the bearing retainer down to fit into the right adapter bellhousing, other than that everything installed smoothly and the clutch feels great. Yes, I recommend this product. Excellent Product Rated by Fig1 on April 11, 2021 Summary: Although this part did not work for the project I am involved in the customer service was excellent. The part was very high quality. Yes, I recommend this product. I would buy this product again. Rated by Drilldog on November 25, 2020 Summary: Product was an easy installation. On my T5 transmission mounted on a 302 w/ a Luk flywheel and clutch I had to add extra shims to get the throw out bearing within .200" of the clutch fingers. Adding the extra shims moved the throw out bearing far enough out that I had to lenghten the guide rod .750". Dont forget to pull the bearing race off the old shaft and install it on the new provided shaft. Yes, I recommend this product. I recommend this product Rated by Rolix on May 13, 2020 Summary: Quality product. Fitment is dead on! Yes, I recommend this product. Great quality and easy to follow instructions Rated by Jack on November 16, 2019 Summary: Great product and easy to follow instructions Yes, I recommend this product. Related Items / Suggested Parts Ram Clutches 78505 Street Stock Hydraulic Throwout Bearing-Rebuild Kit Speed Bleeder Bleed Screws, 1/4-28 Tech Support We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help. About Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 73 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.

Price: 255 USD

Location: Lincoln, Nebraska

End Time: 2025-01-27T13:02:06.000Z

Shipping Cost: 0 USD