Description: Fea tures: 1. The spindle motor and laser cannot be connected at the same time 2. The offline control board and the SUB data cable cannot be connected at the same time 3. Turn on the power after the electrical connection is completed 4. The positive and negative of the input power must not be reversed, and the reverse connection will burn 5. The 48VDC interface cannot be connected to the switching power supply, and the voltage that can be passed through theDC seat of the control board cannot be greater than 5A. Parameters: ▶Power Supply:DC12-48V ▶Spindle:24V 0-500W ▶Stepper Motor:X/Y1/Y2/Z ▶Fan:5V ▶Connect Laser:2pin/3pin/2pin-2pin ▶Support:Servo/Offline controller/Limit switch ▶Connection:USB Cable Packing list: 1* controller 1* USB cable 1*775 motor cable Terminal definition diagram： Connect To 48V Spindle Motor : Connect To 24V Laser Module: Install on Machine:
Price: 32.31 USD
Location: zhengzhou
End Time: 2024-08-21T05:48:22.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: LUNYEE
MPN: Does Not Apply
Number Of Axes: 3
Application: Dual Axis
Input Voltage: 12 V
Run Method: Bipolar
Model: 3 axis control board 5.2
Country/Region of Manufacture: China
Modified Item: No
Input power: 24V/5A (support 48V500W power supply)
Drive form: Onboard 4 drives
MCU model: MEGA328P/Arduino
Data line interface: Mini USB2.0
Control board type: Three-axis control board
Support axis: X, Y1, Y2, Z，
Support limit switch quantity: X+, X-, Y+, Y-，
Offline: support
