LR-XN10 Keyence Compact Laser Sensor - Amplifier Units Expansion Unit

Description: Specificationshorizontal-scroll-state#setOverflowing scroll->horizontal-scroll-state#setScrolled" data-horizontal-scroll-state-target="container" data-horizontal-scroll-state-overflowing-class="is-overflowing" data-horizontal-scroll-state-has-scrolled-class="is-hasScrolled" data-scroll-to-coord-target="container" style="padding: 0px; margin: 0px; box-sizing: border-box; color: rgb(72, 75, 76); font-size: 17px; font-weight: 400;">ModelLR-XN10Type—Cable/ConnectorMain Unit/Expansion UnitExpansion UnitNo. of Control OutputsNone*1No. of External Inputs—Response Time500 µs*2/1 ms/3 ms/10 ms/200 ms SelectableIO-Link—FunctionsTimer FunctionTimer OFF/Off-delay/On-delay/One-shot/On-Off delay/On-delay One-shotI/OControl Output—External InputUnit ExpansionUp to 8 expansion units possible (including main unit, a total of 9 units connected) However, up to 16-unit expansion is possible when the LR-XN10 is used for expansion with the NU Series.Protection CircuitProtection against reverse power connection, protection against output overcurrent, protection against output surge, protection against reverse output connectionNumber of Interference Prevention DevicesOFF/4 units/8 units selectable*3Power supplyPower voltage16 to 30 VDC*4 (including 10% ripple (P-P) or less), class 2Power consumptionDuring normal operation: 1060 mW (44 mA or lower at 24 V, 61 mA or lower at 16 V), ECO ON/ALL: 895 mW (37 mA or lower at 24 V, 50 mA or lower at 16 V)Environmental resistanceAmbient temperature−20 to +55°C -4°F to 131°F (no freezing)*5Relative humidity35 to 85% RH (no condensation)Vibration resistance10 to 500 Hz; Power Spectral Density: 0.816 G2/Hz; X, Y, and Z directionsShock resistance500 m/s2 (50G); 3 times each for X, Y, and Z axesCase MaterialMain Unit and Cover: PolycarbonateAccessoriesInstruction manualWeightApprox. 21 g*1 This counts as 1 output when expanding with multiple units to the FS-MC8N/MC8P and NU Series.*2 If 500 µs is selected, the following limitations apply.· Only 2-point calibration can be performed.· The detection range masking is set during calibration. (Manual setting of the masking range is not supported.)· Output 2 is limited to an alarm output for errors and gyro issues, and standard/area cannot be used.· The interference prevention function is not supported*3 Selecting four or eight interference prevention units causes the response time to change as follows: 4 Units selected: 6 ms/18 ms/60 ms/1.2 s selectable; 8 Units selected: 12 ms/36 ms/120 ms/2.4 s selectable.*4 When expanding the system with 4 or more expansion units, use a power voltage of 20 V or higher.*5 Expansion by 1 or 2 units: −20 to +55°C -4°F to 131°F; Expansion by 3 to 10 units: -20 to +50°C -4°F to 122°F, Expansion by 11 to 16 units: -20 to +45°C -4°F to 113°Fhorizontal-scroll-state#setOverflowing scroll->horizontal-scroll-state#setScrolled" data-horizontal-scroll-state-target="container" data-horizontal-scroll-state-overflowing-class="is-overflowing" data-horizontal-scroll-state-has-scrolled-class="is-hasScrolled" data-scroll-to-coord-target="container" style="padding: 0px; margin: 0px; box-sizing: border-box;">

Price: 150 USD

Location: Garland, Texas

End Time: 2025-02-01T20:44:06.000Z

Shipping Cost: N/A USD