Mark-10 M5-05 Advanced Digital Force Gauge, Capacity 0.5 lbf / 250 G, 110V

Description: Product Description The Mark-10 M5-05 Advanced Digital Force Gauge, Capacity 0.5 lbf / 250 G, 110V is designed for tension and compression force testing in quality control, manufacturing, and R&D areas. A range of capacities from 0.12 lb to 500 lb (0.5 N to 2500 N) is available to address numerous applications in the medical device, pharmaceutical, packaging, consumer products, automotive, aerospace, and other industries. The force gauges feature an industry-leading peak sampling rate of 7,000 Hz, producing accurate results even for quick-action tests. Accuracy is approximately 0.1% of full scale approximately 1 digit, and resolution is 1/5000. A large, backlit graphics LCD displays large, legible characters, while the simple menu navigation allows for quick access to the gauges many features and configurable parameters. Data can be transferred to a PC or other data collector via USB, RS-232, Mitutoyo (Digimatic), or analog outputs. On-board data memory for up to 1000 readings is included, as are statistical calculations and output to a PC. Integrated set points with indicators are ideal for pass-fail testing and for triggering external devices such as an alarm, relay, or test stand. The gauges are overload protected to 150% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. The Series 5 averaging mode addresses the need to record the average force over time, useful in applications such as peel testing, while external trigger mode makes switch activation testing simple and accurate. An ergonomic aluminum design allows for hand held use or test stand mounting for more sophisticated testing requirements. The housing may be reversed in order for the load cell shaft to be oriented up or down, while the display and buttons remain upright.Product FeaturesHigh-speed 7,000 Hz peak sampling rateUSB, RS-232, Mitutoyo, and analog outputsAveraging mode - calculates average readings over timeExternal trigger mode - for switch contact testing or remotely stopping display updateProgrammable set points, with alarms and outputsLarge backlit graphic display1,000-point data memory with statistics and outputsLive load bar graph with set point markersPassword protection, configurable for individual keys and calibrationPeak readings always displayedConfigurable audio alarms and key tonesAluminum constructionIncludes NIST Traceable Calibration Certificate Product SpecificationsAccuracyapproximatelly 0.1% of full scale approximatelly 1 digitPowerAC or rechargeable battery. Low battery indicator appears when battery level is low, and gauge powers off automatically when power reaches critical stage.Battery LifeUp to 24 hours of continuous use (Backlight off)Measurement UnitslbF,ozF,gF,kgF,N,kN,mN (depending on model)OutputsUSB / RS-232Configurable settingsDigital filters, outputs, automatic output (via USB/RS-232), automatic shutoff, default settings, averaging mode, external trigger, passwords, key tones, audio alarms, backlight, calibrationSafe Overload150% of full scale (display shows "OVLD" at 110% and above)Weight(gauge only)1 PoundComplete KitCarrying case, chisel, cone, V-groove, hook, flat, extension rod, AC adapter, battery, USB cable with driver, MESURgauge DEMO software, NIST-traceable certificate of calibration with dataWarrany3 yearsKit Contents Mark-10 Series 5 Digital Force GaugeExtension rodHookConeChiselV-GrooveFlatCouplingThread adapterUSB cableAC adapterBatteryResource CDCertificate of calibration with dataCarrying case

Price: 1580 USD

Location: Tomball, Texas

End Time: 2024-08-25T22:07:38.000Z

Shipping Cost: 0 USD