Description: W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.Key Features– RP2040 microcontroller with 2MByte Flash – Dual-core cortex M0+ at up to 133MHz – 264kByte multi-bank high performance SRAM – External Quad-SPI Flash with eXecute In Place (XIP) – High performance full-crossbar bus fabric – 30 multi-function General Purpose IO (4 can be used for ADC) – 1.8-3.3V IO Voltage (NOTE. Pico IO voltage is fixed at 3.3V) – 12-bit 500ksps Analogue to Digital Converter (ADC) – Various digital peripherals – 2 × UART, 2 × I2C, 2 × SPI, 16 × PWM channels – 1 × Timer with 4 alarms, 1 × Real Time Counter – 2 × Programmable IO (PIO) blocks, 8 state machines total – Flexible, user-programmable high-speed IO – Can emulate interfaces such as SD Card and VGA– Includes W5500 – Supports Hardwired Internet Protocols: TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE – Supports 8 Independent Hardware SOCKETs simultaneously – Internal 32 Kbytes Memory for TX/ RX Buffers – Supports High Speed Serial Peripheral Interface(SPI MODE 0, 3)– Micro-USB B port for power and data (and for reprogramming the Flash)– 40 pin 21×51 ‘DIP’ style 1mm thick PCB with 0.1″ through-hole pins also with edge castellations– 3-pin ARM Serial Wire Debug (SWD) port– 10 / 100 Ethernet PHY embedded– Supports Auto Negotiation – Full / Half Duplex – 10 / 100 Based– Built-in RJ45– Built-in LDO
Price: 19.95 USD
Location: West Jordan, Utah
End Time: 2024-08-19T02:24:52.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: WIZnet
Model: W5500-EVB-PICO
MPN: W5500-EVB-PICO
